Research and development led to many new methods of
producing decorative techniques.
These illustrations demonstrate one such method.
1
No.1. is a small model machine able to produce textures to a given
scale. These small panels were put together to produce the gable end to a
block of flats.
2
No. 2: To obtain the full scale pattern I bought an old mangle and made
a concrete roller with the pattern produced in a similar manner to a
cylinder seal.
3
No. 3: When the clay carrying the impressed pattern was cut into
rectangles, it was placed under a home-made vacuum forming machine.
4
5
I purchased a large number of unused refrigerator sides and via the vac
machine sucked these down onto the shaped clay. When set they were
removed, placed in full-size moulds, concrete was cast against them and
the resulting panel was erected on the building (No.5).